This Part Fits
This product is suitable for the following vehicles
- DUSTER 1.5 dCi 4x4 (2010, - , 1461cc, 107hp)
- DUSTER 1.5 dCi (2013, - , 1461cc, 109hp)
- DUSTER 1.6 16V Hi-Flex (2010, - , 1598cc, 105hp)
- DUSTER 1.2 TCe 125 (2013, - , 1197cc, 125hp)
- DUSTER 1.5 dCi 4x4 (2013, - , 1461cc, 109hp)
- DUSTER 1.2 TCe 125 4x4 (2015, - , 1197cc, 125hp)
- DUSTER 1.6 SCe 115 (2015, - , 1598cc, 115hp)
- DUSTER 1.6 SCe 115 4x4 (2015, - , 1598cc, 115hp)
- DUSTER 1.5 dCi (2010, - , 1461cc, 90hp)
- DUSTER 1.6 SCe 115 LPG (2015, - , 1598cc, 115hp)
- DUSTER 1.5 dCi 4x4 (2010, - , 1461cc, 90hp)
- DUSTER 1.5 dCi (2013, - , 1461cc, 110hp)
- DUSTER 1.5 dCi 4x4 (2010, - , 1461cc, 110hp)
- DUSTER 1.6 16V LPG (2011, - , 1598cc, 105hp)
- DUSTER 1.6 16V (2010, - , 1598cc, 105hp)
- DUSTER 1.6 16V 4x4 (2010, - , 1598cc, 105hp)
- DUSTER 1.5 dCi (2010, - , 1461cc, 86hp)
- DUSTER 1.5 dCi (2010, - , 1461cc, 107hp)
OEM
Original Equipment Manufacturer Numbers (OEM)
8200841004
Specification
Quantity required
2
Item Details
SKU
FAI-SS9643
Brand
FAI AutoParts
Barcode
5027049536647
Delivery Info
This item can be dispatched:
Order within
International TAX
EU customers VAT is paid at delivery countries rate through our IOSS number.
International Delivery
Delivery Times will vary depending on Global Location.
SS9643 FAI CONTROL ARM BUSH REAR INNER REPLACES 8200841004
Matching OE specifications and strength is key. A push/pull test of the ball joints on link rods and tie rod ends is performed on both the FAI part and the matching OE part to ensure that the results and quality are both the same. Link rods also experience a vibration test with a minimum of 1 million cycles to replicate the performance of the link rod on a vehicle.
All FAI Steering and Suspension parts follow a rigorous quality programme and significant investment has been made to improve quality including additional robotic technology, completion of 5 different welds in one operation and hydraulic aluminium drilling for a faster, higher quality finish
All parts are cataphoresis coated. This is highly technical paint process used by FAI factories following OE practice. Paint is attracted to the metal by the movement of charged paint particles towards the metallic surface to be painted. This reaches parts missed by spraying and offers better paint adhesion than dipping thus minimising the risk of corrosion. The salt spray test used by FAI factories exceeds most OE standards by 30%.
The range extension covers a wide variety of Steering and Suspension parts with particular emphasis on anti-roll bar bushes and strut mounts.